TECHNICAL

Allweather strives to work with the blend of traditional touch in modern science and technology. Our advanced methodologies ensure perfection in the outcome. The creative artisans work skillfully with our superior grade products to finalize the craftsmanship artistically.

Allweather decorative plaster comprises hydrated lime, crushed marbleand/or chips combined with binders sourced from Europe to make it durable and customized. Synthetic colourants are used to create more than 80 shades.

FEATURES

  • Minerals

  • Low VOC content

  • Powder product unaffected by water

  • Pot life above 48 hours

  • Customized finishes achievable

  • Ease to work in a wide range of site conditions

  • Enhanced water vapor permeability

  • Non-combustible when supplied or applied

  • Storage at room temperature

  • Water based

SAFETY AND PRECAUTIONS

Allweather base coat and plaster comes in powdered form. A dust mask should always be worn when mixing or handling the product. The product contains hydrated lime and marble chips that might lead to irritability. Wear protective clothing, gloves and eye protection. If contact occurs wash affected areas immediately with soap and water.

Application Instructions

  • Mix and apply Allweather basecoat over a smooth surface. (Base surface should be free of undulations)

  • Scrape over the dry basecoat to remove any small lumps or trowel lines paying special attention at the corners or the interface with other surfaces

    risus dictum, ornare mauris.

  • Apply the plaster in a small area at a time

  • Once the second coat has been applied clean off the trowel and work over the surface with the trowel, remove any excess fatty material and fill any imperfections in the surface

  • Leave the surface to dry

  • Apply wax, clean and handover.

SUITABLE SUBSTRATES

  • Allweather decorative plaster should be applied on walls that are done with quality primer and putty; preferably putty that comes in paste form.

  • To apply Allweather decorative plaster on existing painted surfaces a thick coat of primer is required. Any undulations or damages to the existing painted surfaces should be rectified before the primer is applied.

  • Great care needs to be taken if Allweather decorative plaster is applied on MDF, wood primer and putty is needed; joints need to be taken care off.

  • Allweather decorative plaster should not be applied over wallpapers. It should be removed first and the wall should be treated with a coat of primer.

SCRUBBING AND CLEANING

  • For a wall coating Allweather decorative plaster is extremely tough and can be cleaned or scrubbed with a foam or cotton cloth. Allweather decorative plaster will take a minimum of 5000 scrubs.

Disclaimer

We have put in a lot of effort to ensure reliability and accuracy of the information provided above, however the information should not be relied upon as a substitute for formal advice. We will not be liable for any loss or damage, of any kind, arising out of or in connection with the use of this data sheet.

FREE QUOTE

Do you need help with decorative plaster ? Fill out this form to get in touch.